SMT JUKI RS-1 NOZZLE 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 Nozzle For Chip Mouter Machine

SMT JUKI RS-1 NOZZLE 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 Nozzle For Chip Mouter Machine

Introduce

The SMT placement machine nozzle can pick up and place components of different shapes and sizes in different ways. When the vacuum pressure is generated, the negative pressure of the suction nozzle will suck the components out of the supply system. When the suction nozzle sucks the vital parts, the system will determine that the suction nozzle has successfully sucked the components only when the specified vacuum degree is reached. When components stand sideways or materials are thrown, causing the suction nozzle to fail to successfully pick up the components, the SMT placement machine will send out an alarm signal. When our nozzle picks up the components and attaches them to the PCB, we usually use two methods to place them. One is to mount according to the height we entered in the system in advance. When the placement head of our SMT placement machine drops to the set height, the vacuum is released and the components are placed on the pads. Generally we do not use this method because it is inflexible. Another method is to achieve a soft landing of placement under the action of the pressure sensor due to the instantaneous reaction between the nozzle and the PCB board, so that our placement is easier and smoother. The suction nozzle is a piece of equipment that we often use in production and placement. It is often in contact with components and will be worn and damaged over time. Therefore, the material and structure of the suction nozzle of SMT placement machines are receiving more and more attention. In the early days, alloy materials were used, and later they were changed to carbon fiber wear-resistant plastic materials. More advanced nozzles use ceramic materials and diamond to make the nozzles more.

Main Features

SMT (Surface Mount Technology) nozzle is an important tool used in automated placement equipment for electronic components, used to pick up and place small electronic components. There are many types of SMT nozzles according to different needs, common ones include:

In addition, there are some special types of nozzles, such as rotating nozzles, elbow nozzles, etc., which can be selected and used according to specific placement requirements. It should be noted that different nozzles are suitable for electronic components of different sizes and shapes. Choosing the appropriate nozzle type is very important for the efficiency and quality of placement work.

Applications

PCB Assembly:
Used in JUKI pick-and-place machines for the assembly of various electronic components onto PCBs in high-volume production environments.
Prototyping:
Useful in prototype assembly where flexibility in handling different component types is required.
Repair and Rework:
Nozzles can be employed in rework stations to assist in the precise placement of components during repair processes

Relative nozzles with part number for Juki series:

E35017210A0 JUKI NOZZLE 101 ASSY Ø 1.0x0.4
E35027210A0 JUKI NOZZLE 102 ASSY Ø 1.5x1.0
E35037210A0 JUKI NOZZLE 103 ASSY Ø3.0x1.7
E35047210A0 JUKI NOZZLE 104 ASSY Ø 4.0x3.2
E35057210A0 JUKI NOZZLE 105 ASSY Ø 6.5x5.0
E35067210A0 JUKI NOZZLE 106 ASSY Ø 9.0x8.0
E35517210A0 JUKI NOZZLE 201 ASSY Ø 3.5x1.0
E35527210A0 JUKI NOZZLE 202 ASSY Ø 5.5x3.2
E35537210A0 JUKI NOZZLE 203 ASSY Ø 8.5x5.0
E35547210A0 JUKI NOZZLE 204 ASSY Ø 9.0x8.0
E3600729000 JUKI NOZZLE 500 Ø 0.7x0.4
E36017290A0 JUKI NOZZLE 500 Ø 0.7x0.4
E36037290A0 JUKI NOZZLE 500 Ø 1.6x1.0
E36047290A0 JUKI NOZZLE 500 Ø 3.5x1.7
E36057290A0 JUKI NOZZLE 500 Ø 5.0x3.2
E36067290A0 JUKI NOZZLE 500 Ø 8.5x5.0
E36077290A0 JUKI NOZZLE 500 Ø 9.0x8.0
E36087290A0/40011046 JUKI NOZZLE 500 ASSY Ø1.0 X 0.5
E36007290A0/40001339 JUKI NOZZLE 501 ASSY Ø 0.7x0.4
E36017290A0/40001340 JUKI NOZZLE 502 ASSY Ø 0.7x0.4
E36027290A0/40001341 JUKI NOZZLE 503 ASSY Ø1.0x0.6
E36037290A0/40001342 JUKI NOZZLE 504 ASSY Ø1.5/1.0
E36047290A0/40001343 JUKI NOZZLE 505 ASSY 3.5/1.7
E36057290A0/40001344 JUKI NOZZLE 506 ASSY Ø5.0/3.2
E36067290A0/40001345 JUKI NOZZLE 507 ASSY Ø8.5/5.0
E36077290A0/40001346 JUKI NOZZLE 508 ASSY Ø8.5 /5.0
E36077290A0/40025165 JUKI NOZZLE 509 ASSY Ø0.1/0.4
E36157290A0 JUKI NOZZLE 510 ASSY Ø1.5/0.6
E36167290A0 JUKI NOZZLE 511 ASSY Ø2.0/1.2
E40017210A0 JUKI PICK UP NOZZLE
E40027210A0 JUKI PICK UP NOZZLE
E40057210A0 JUKI PICK UP NOZZLE
E40067210A0 JUKI PICK UP NOZZLE
E40077210A0 JUKI PICK UP NOZZLE
E40087210A0 JUKI PICK UP NOZZLE
E40097210A0 JUKI PICK UP NOZZLE
E40107210A0 JUKI PICK UP NOZZLE
E40117210A0 JUKI PICK UP NOZZLE
E40127210A0 JUKI PICK UP NOZZLE
E40137210A0 JUKI PICK UP NOZZLE
E40147210A0 JUKI PICK UP NOZZLE
E40167210A0 JUKI PICK UP NOZZLE
E40177210A0 JUKI PICK UP NOZZLE
E40187210A0 JUKI PICK UP NOZZLE
E40207210A0 JUKI PICK UP NOZZLE
E40217210A0 JUKI PICK UP NOZZLE
E40227210A0 JUKI PICK UP NOZZLE
E40237210A0 JUKI PICK UP NOZZLE
E40247210A0 JUKI PICK UP NOZZLE
E40257210A0 JUKI PICK UP NOZZLE
E40267210A0 JUKI PICK UP NOZZLE
E40277210A0 JUKI PICK UP NOZZLE
E40287210A0 JUKI PICK UP NOZZLE
E40297210A0 JUKI PICK UP NOZZLE
E40307210A0 JUKI PICK UP NOZZLE
E40317210A0 JUKI PICK UP NOZZLE
E40337210A0 JUKI PICK UP NOZZLE
E40347210A0 JUKI PICK UP NOZZLE
E40357210A0 JUKI PICK UP NOZZLE
E40367210A0 JUKI PICK UP NOZZLE
E40377210A0 JUKI PICK UP NOZZLE
E40387210A0 JUKI PICK UP NOZZLE
E40397210A0 JUKI PICK UP NOZZLE
E40417210A0 JUKI PICK UP NOZZLE
E40427210A0 JUKI PICK UP NOZZLE
E40437210A0 JUKI PICK UP NOZZLE
E40447210A0 JUKI PICK UP NOZZLE
E40457210A0 JUKI PICK UP NOZZLE
E40467210A0 JUKI PICK UP NOZZLE
E40477210A0 JUKI PICK UP NOZZLE
E40487210A0 JUKI PICK UP NOZZLE
E40497210A0 JUKI PICK UP NOZZLE
E40507210A0 JUKI PICK UP NOZZLE
E40517210A0 JUKI PICK UP NOZZLE

We also have these brand nozzle on hot sale:

Nozzle specification

SMT JUKI RS-1 NOZZLE 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 Nozzle For Chip Mouter Machine Images